рус укр ENG deu pol esp fra por rom
Factory-producer of CAD separators
SPC «Aeromeh»™ Ltd.
Equipment for cleaning and calibration of grain
Separator CAD-4
Separator CAD-5
Separator CAD-7
Separator CAD-10
Separator CAD-10-01
Separator CAD-15
Separator CAD-20
Separator CAD-30
Separator CAD-40
Separator CAD-50
Separator CAD-100
Separator CAD-150
Grain loaders

Calibration of millet in Russia


Millet is one of the main food crops that is actively used for the production of cereal products. Experts consider that in recent times one of the major problems of millet market is quality of grain products.

With the support of LLC "Eurotel" Federal State Budgetary Institution "Volga State Zonal Machinery Testing Station" (Russia) on the threshing-floor of LLC «Sato M» of Bezenchyuk district of Samara region of Russia carried out tests of aerodynamic separator CAD on preliminary, primary and other modes of millet grain cleaning. Samples of the initial material were substandard and had different levels of grain quality and its degree of contamination.

Research showed the following results:

Table 1.

Preliminary cleaning of millet on separator CAD
Initial material II III IV V
Name of material   Cash grain Cash grain Feed grain Waste
Purity, % (content of seeds of the main crop) 92,08 96,58 95,98 85,56 36,70
Mass of 1000 seeds, g 7,96 9,0 8,68 6,10 3,31
Nature, g/l 736,1 767,6 762,7 648,5 442,0
Weed admixture, %, total: 1,19 0 0 2,62 29,90
Grain admixture, %, total: 2,39 0,20 0,87 6,57 2,7
- weak 0,28 0 0 0,20 0,70
Basic standards Non cl. II Non cl. - -

Preliminary cleaning of millet on separator CAD allowed to upgrade part of the seeds from non-class to II class.

Table 2.

Primary cleaning of barley on separator CAD
Initial material II III IV V
Name of material   Cash grain Cash grain Feed grain Waste
Purity, % (content of seeds of the main crop) 95,35 99,60 98,23 87,38 32,90
Mass of 1000 seeds, g 8,04 9,05 8,67 5,90 3,18
Nature, g/l 745,7 770,6 761,5 671,7 464,7
Weed admixture, %, total: 1,55 0 0,23 2,94 33,50
Grain admixture, %, total: 1,47 0 1,06 5,55 1,9
- weak 0,03 0 0 0,15 0,30
Basic standards Non cl. I II - -

Primary cleaning of millet on separator CAD allows to obtain grain of I and II class.

FSI "Volga machinery testing station" found that separator CAD provides high-quality grain cleaning at all stages of production and recommends to install the separator on grain and seed production.

Millet seeds in Petri dishes

Millet Millet cleaned by machine CAD, cleaning millet, millet in Petri dishes

Calibration of millet in Russia
Calibration of barley in Russia
Rapeseed calibration
Corn calibration
Wheat calibration
Pea calibration
Sunflower calibration
Sowing qualities of the seeds of winter wheat
Cleaning: Wheat, Millet, Pea, Soya, Phacelia, Coriander
Phytosanitary indexes of seeds
Rice calibration
Research of barley separating in Norway
Calibrating of winter wheat in England
Calibration of wheat and oats in Norway
Bakery qualities of grain - Cambridge, Great Britain
Concentration of iron ore
Separation SDW
to news
Surname, name:


Eng; Рус; Укр.

20 april 2020
During the harvesting and preparation of grain crops for storage, it is very important to accurately complete all stages of the post-harvest process. One of the most significant steps is grain cleaning. It makes it possible to save the crop from dust and impurities, weeds, pests, dry mass, separate the seeds, and also qualitatively prepare the grain for further storage and processing. Universal grain cleaning equipment CAD separators has a high capacity, processing almost all types and varieties of crops, legumes, oilseeds, industrial, small-seed herbs and vegetables. The grain separator can be used independently or in combination with other units, performing the complete chain of processing crops. AEROMEH company offers grain cleaning machines for various tasks. From us you can buy small separators CAD-4 and CAD-5 for small farms, as well as grain separators CAD-100 and CAD-150 - more productive and always efficient. Grain cleaning equipment of AEROMEH production consists of several components. Grain enters the hopper feeder of the CAD separator. With the help of the vibrating tray, the grain is evenly distributed in the separation chamber over its entire width. Air flow generator of the CAD grain separator processes each element of the separated stream with the powerful flows. During this process, the heap is cleaned of dust, light impurities, crushed grain, weed seeds and other mineral and green impurities. Separation or sorting of grain with the CAD separator is done into 5 fractions. After cleaning with the separator CAD, the best and cleanest grain goes to the 2nd and 3rd fractions. Small impurities, crushed seeds and waste of various origins go to the 4th and 5th fractions. In the calibration mode, the 2nd and 3rd fractions of CAD separators is proper seed material, which is obtained by selecting the grain by the specific weight. The equipment has durable body, and does not have replaceable elements and lubrication points, therefore it can work for many years without failures in operation. At the peak of the season, when the grain cleaning is carried out for many hours in a row, it is very important that the machines work clearly and smoothly, because every day of a downtime can bring losses to the agricultural economy. We offer reliable equipment that does not require expensive consumables or special care, it gives maximum efficiency without taking significant investments. AeroDynamic separator CAD is a modern and reliable grain cleaning equipment. Innovative solutions used in the CAD separator allow to solve a lot of problems in the field of grain cleaning. In addition, CAD is a technology for producing high-yielding seeds. Time tested. phones.

See all news

Marry Cristmass
20 december 2019
"Aeromeh" team wishes everyone a Happy New Year and Merry Christmas. Let your wishes come true, let your ideas successfully come true, let your aspirations and dreams lead you to new heights of happiness. Be loved in the new year and be healthy, live well and remember: we value each of you. Read more about our location at the exhibition on our phones.

See all news

AEROMEH invites to Kiev for the international exhibition AGRO-2019
1 june 2018
From 4 to 7 June 2019 in Kiev will be held the largest international agro-industrial exhibition in Ukraine and Eastern Europe, "AGRO-2019". AEROMECH invites you to visit our stand, which will be located near pavilion 9, place В06. You will be able to see our equipment in operation, as well as get acquainted with the new products. You also have the opportunity to bring grain samples with you to test our grain cleaning machines at work. We will be glad to welcome you at our stand! Read more about our location at the exhibition on our phones.

See all news

Tel.: +38(050)348-92-53, +38(095)340-00-08
Tel.: +38(097)727-23-82, +38(097)724-84-42
SKYPE: aeromehsad, ICQ: 695-884-599
© 2001–2024 SPC "Aeromeh"™ Ltd.